Dymo LabelPOINT 350 Betriebsanweisung PDF herunterladen (Seite 2)

Connecting the Power Adapter

An optional AC power adapter can also be used to

power the labelmaker. Connecting the AC adapter

to the labelmaker disconnects the batteries as a

power source.

To connect the power adapter

1. Plug the power adapter into the power connector

on the top, left side of the labelmaker.

2. Plug the other end of the power adapter into a

power outlet.

Make sure the labelmaker power is turned off

before you disconnect the power adapter from the

main power source. Otherwise, your most recent

memory settings will be lost.

Inserting the Label Cassette

Your labelmaker comes with one label cassette.

Visit www.dymo.com for information about

purchasing additional label cassettes.

To insert the label cassette

1. Press and release the label cassette cover to

open the label compartment. See Figure 4.

Figure 4

The first time you use the labelmaker,

remove the protective cardboard insert from

between the print head and pinch roller. See

Figure 5.

Figure 5

2. Set the cassette switch for the size of the label

cassette that you are inserting. See Figure 5.

A notch in the cassette fits over the switch when

the cassette is in the correct position.

3. Make sure the tape and ribbon are taut across

the mouth of the cassette and that the tape

passes between the guideposts. If necessary,

turn the spool clockwise to tighten the ribbon.

4. Insert the cassette with the tape and ribbon

positioned between the print head and pinch

roller. See Figure 6.

Figure 6

5. Press firmly until cassette clicks into place.

6. Close the label cassette cover and press

turn on the power.

Remove

Select tape

cassette size

cardboard insert

CLICK!

1 2 3 4 5 6 7 ... 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Dymo LabelPOINT 350 Betriebsanweisung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Etikettendrucker Dymo LabelPOINT 350